Stainless Steel Bracelet Construction: The Folded Link, Push-Pin, and Screw-In Bracelet Systems
There are a variety of different bracelet styles on the market, each with its own appeal.
FEBRUARY 12, 2020
Today, we’re taking a look at the three most common bracelet styles, the folded link, push-pin, and screw-in.
Folded Link Bracelets
Folded link bracelets require little material, manpower, and machining to manufacture, making them the most affordable to produce and purchase. You can find folded link bracelets on Amazon and eBay, most of which are listed around $20 each. In most cases, they look just fine, but (once worn) their comfort leaves a bit to be desired.
The bracelets are assembled by folding thin pieces of steel into the desired shapes in such a way that, when wrapped around the thin metal palette at their core, they hold together in the form of a watch bracelet. Often difficult to see from the front, a quick glance at the side and the back of the bracelet will reveal if this is the construction you’re dealing with. It isn’t inherently a bad thing, in spite of its cheaper production cost.
To size a folded link bracelet, simply pry open the center of the desired links with a thin blade, and then separate the links. It’s a process, like any that involves a knife, that absolutely requires your full attention.
Push-Pin/Pin-and-Collar Bracelets
Unlike folded link bracelets, the next two options are more often comprised of completely solid steel links (though some will employ hollow center links as a way to cut costs even more). Here, we have a construction system that will be familiar to many Seiko enthusiasts: the pin-and-collar system.
Holes are drilled into the sides of the links to allow for the pin and its metal collar to be inserted or removed using a tool like the one seen above. This collar is essentially a thin, small metal cylinder that slides into the links, locking them together along with the pin.
Much like the folded link system, once the pin and its collar are removed, the links will come apart, and then links can be added or removed as needed to ensure the watch fits your wrist perfectly. Make sure to keep track of that collar, since it’s integral to the structure of the bracelet. I recommend doing this over some kind of white blanket or towel so the thing, when it inevitably falls out of the link and onto the table, will be more visible.
Screw-In Link Bracelets
All hail the screw-in link bracelet! This is, by far, the simplest bracelet to resize. It’s also very reliable. It takes the basic premise of the pin-and-collar system, and instead replaces the pins and collars with a simple screw, typically no wider than an eyeglass screw. However, to make this effective, the insides of each link must be drilled out and threaded perfectly in order for the screws to be secure. The end result is a process that requires a bit more precision and know-how and, as such, is more expensive to produce.
That being said, screw-link bracelets are so easy to size – adjusting involves only, as you might expect, the screwing and unscrewing of the links, but with this does come some potential concern, as stripping the screws results in the links, and possibly the whole bracelet if you cross-thread the wrong link, becoming entirely unusable. Unlike the collars, which are replaceable, stripping the screws/ruining the threading renders the links useless since they can’t be secured back into the bracelet anymore.
For this one, I recommend taking it to be sized the first time if you can, and just observing the watchmaker/jeweler unscrewing the links to see up close how they go about it before trying it out for yourself. If and when you do decide to take matters into your own hands, the same rules apply for throwing down a towel or blanket and keeping everything as contained as possible.
And finally, don’t attempt to alter your bracelet without the proper tools. There are a number of tools available from manufacturers like Bergeon, designed specifically for watchmakers to work on their timepieces. Many of these tools end up being helpful for those of us who don’t want to take to the nearest watch shop or jeweler every time something needs to be repaired or adjusted, as well. I do highly recommend checking out their selection of tools to if you’re considering doing some serious work on one of your watches or bracelets.
We upload new content every day of the week!





